Ribbon: Catenary Design > Cross Span
To create a multitrack arm 2, one or two support points
and one holder must be given.
Intention
|
Create a multi track cross arm 2.
|
Instructions
|
- Run the Create
Multi Track Cross Arm 2 function.
- Select the holder
(e.g. pole) for the Multitrack arm 2.
- Select the first
and perhaps second support point to which the Multitrack arm 2 should be
associated. If only one support point is given, exit the support point query.
- Run the Create
Multi Track Cross Arm 2 function.
- A dialog with two
registers will appear. Enter the data in the input fields. The ID number is
automatically generated by Sicat Master.
- Confirm your
entries with OK.
|
Result
|
Sicat Master creates a multitrack arm 2 and saves
the data in the project database. With compressive stress Sicat master
automatically creates a connection beam and, in addition, an insulator for the
pole and the connection beam, if it exists. Moreover, insulators will be
created in the suspension, which are controlled from the tab cantilever in the
support point.
|
Between the holder and the support point(s) a connecting
line appears in the drawing area.